xTool SafetyPro™ AP2 Max - Replacement Filters

Keep your AP2 Max performing like new. Choose the exact filter you need to maintain clean, safe air in your DTF and apparel-printing workspace.

Available Filter Types

• Pre-Filter - Captures larger dust and fibers to protect downstream filters and extend their lifespan.
• Medium-Efficiency Filter - Traps fine particulate (PM) before HEPA stage for steadier airflow and longer service life.
• Activated Carbon Layer - Adsorbs odors and VOCs generated during curing/powdering and heat processing.
• Ultra-Dense Carbon Mesh - High-surface-area carbon matrix for stubborn fumes/odors.
• Formaldehyde Filter - Removes >80% formaldehyde.
• HEPA Filter - Final particulate capture for clean, breathable exhaust air.
• 6-Pack - Get all filters as Save! Includes 1 each Pre-Filter, Medium Efficiency, Activated Carbon, Ultra-Dense Carbon Mesh, Formaldehyde, HEPA.

Select and purchase filters individually as needed. AP2 Max features a multi-stage path; replacing the right stage at the right time reduces cost and downtime.

Why Replace Regularly

• Performance: Clogged filters reduce suction and can lead to odor or smoke leakage.
• Longevity: Upstream stages (pre/medium) protect HEPA and carbon media from premature loading.
• Air Quality: Fresh carbon layers maintain odor/VOC adsorption efficiency for indoor compliance.

Typical service lifespans vary by use; individual AP2 Max filters commonly span roughly 100-600 hours of operation. Monitor airflow/odor and replace as needed.

Installation (Quick Steps)

1. Power off AP2 Max and disconnect the power cable.
2. Open the magnetic filter door and note the filter order.
3. Remove the spent filter; vacuum any loose dust in the chamber.
4. Unwrap the new filter and install with the airflow arrow in the correct direction.
5. Close the door, reconnect power, and run the unit on high for 1-2 minutes to seat the media.

Clean/empty the cyclone pre-stage regularly to extend filter life. Always follow the official user guide for safety and detailed steps.

Compatibility

These filters are designed specifically for the xTool SafetyPro™ AP2 Max air purifier. (AP2 uses a different filter set.)