CLOGBUSTER PRO - 4-Stage Printhead Clog Rescue System

When ordinary cleaning solution is not enough, it is time to bring in CLOGBUSTER PRO.

This complete professional recovery system combines four specialized DTFLINE solutions into one powerful, step-by-step process designed to attack stubborn printhead clogs from multiple angles.

CLOGBUSTER PRO does more than simply flush the printhead. It delivers a coordinated clog-busting, deep-cleaning, flushing, and lubricating process designed to give severely clogged printheads their best possible chance of recovery.

Complete Kit Includes: Four 240 ml solutions - LAST CHANCE, CLEANING, XTREME CLEANING, and MAINTENANCE, plus syringes, cleaning tubes, and complete step-by-step CLOGBUSTER PRO instructions.

The CLOGBUSTER PRO 4-Stage Process

1. STAGE 1: LAST CHANCE
   The first and most aggressive clog-busting stage. LAST CHANCE attacks severe dried ink, hardened residue, and stubborn internal restrictions that ordinary cleaning solution may not be able to remove.
2. STAGE 2: CLEANING FLUSH
   Regular Cleaning Solution is used to flush out LAST CHANCE, loosened ink, and broken-down residue before moving to the next stage.
3. STAGE 3: XTREME CLEANING
   XTREME delivers a second powerful attack on any remaining buildup, restrictions, or partially clogged channels. It is then followed by another Cleaning Solution flush to clear the printhead.
4. STAGE 4: MAINTENANCE
   Once the clog has been cleared and the printhead is clean, Maintenance Solution completes the CLOGBUSTER PRO process by lubricating the internal channels and helping protect the printhead during periods of inactivity.

Why CLOGBUSTER PRO Packs a Bigger Punch

Severe printhead clogs are often made up of multiple layers of dried ink, settled pigment, and hardened residue. A single cleaning fluid may only attack part of the problem.

CLOGBUSTER PRO uses multiple specialized formulas in a precise sequence. Each stage performs a different job:

• LAST CHANCE attacks the toughest blockage.
• CLEANING flushes away dissolved ink and residue.
• XTREME delivers a second deep-cleaning strike.
• MAINTENANCE lubricates and helps preserve the restored printhead.

The result is a complete printhead rescue process that goes far beyond a basic cleaning flush.

Included in CLOGBUSTER PRO

• 240 ml DTGPRO LAST CHANCE
  Maximum-strength solution for severe and stubborn printhead clogs.
• 240 ml DTGPRO CLEANING Solution
  Used between the stronger stages to flush away loosened ink and cleaning residue.
• 240 ml DTGPRO XTREME CLEANING Solution
  Powerful deep-cleaning formula for remaining buildup and internal restrictions.
• 240 ml DTGPRO MAINTENANCE Solution
  Lubricates and helps protect the printhead after the clog has been cleared.
• Cleaning tools
  Syringes and cleaning tubes for controlled application and flushing.
• Complete instructions
  Detailed, step-by-step CLOGBUSTER PRO usage and recovery procedure.

960 ml of total solution: Enough solution to clean and maintain more than eight printheads, depending on printhead type, number of channels, clog severity, and the amount of solution required during each stage.

Clear the Clog. Flush the Residue. Protect the Printhead.

The final Maintenance stage is what makes CLOGBUSTER PRO more than just a clog-removal kit. Once the printhead is clean and operating properly, Maintenance Solution helps lubricate its internal channels and reduce the risk of ink drying inside the printhead during downtime.

A correctly cleaned and prepared printhead may remain protected for several weeks. However, regular printer operation, circulation, nozzle checks, and routine maintenance are always recommended whenever possible.

Ideal for Stubborn Printhead Problems

• Severely clogged or partially blocked printheads
• Missing or restricted nozzles caused by dried ink or pigment buildup
• Poor nozzle tests that do not improve after ordinary cleaning
• Printers that have remained unused for extended periods
• Flushing printheads, dampers, ink lines, and related ink-delivery components
• Preparing a clean printhead for short-term or extended printer downtime
• Compatible DTF, DTG, UV, sublimation, and specialty inkjet systems

Important: LAST CHANCE and XTREME are powerful cleaning solutions. They should not be left inside the printhead or used as wet-capping fluids. Always flush them thoroughly with regular Cleaning Solution before proceeding to the next stage. Maintenance Solution should only be used after the printhead is clean, unclogged, and producing a satisfactory nozzle test.

Bust the Clog Before Replacing the Printhead

Printhead replacement can be expensive. Before giving up on a severely clogged printhead, hit it with the complete CLOGBUSTER PRO process:

ATTACK. FLUSH. DEEP CLEAN. PROTECT.

CLOGBUSTER PRO gives technicians and printer owners a complete, professional-grade recovery system in one convenient bundle, including four 240 ml solutions, application tools, and detailed instructions.

No cleaning solution can guarantee the recovery of every printhead. Printheads with electrical damage, physical damage, delamination, damaged membranes, or permanent internal blockage may require replacement. Results depend on the printhead condition, ink chemistry, severity and age of the clog, and correct use of each solution.

Always follow the included CLOGBUSTER PRO instructions and your printer manufacturer's recommended service procedures. Wear gloves and eye protection, work in a well-ventilated area, and never force solution through a printhead using excessive syringe pressure.